Pioneer Copper Piping Kit Lineset for Mini Split Installation
For a micro-split installation, securely connect your inside and outdoor units using Copper Piping Kit Lineset for Mini Split. Because Copper Piping Kit Lineset for Mini Split are long-lasting, you may install them, enjoy the benefits of your new heating and cooling system, and forget about them.
Everything needed for micro-split piping is included in our kits, including copper pre-flared refrigerant pipes that minimize rusting and require less maintenance in the future, as well as non-adhesive wrapping tape. For Copper Piping Kit Lineset for Mini Split Installation, choose from Pioneer's copper piping kit line set and match your heat pump with high-quality parts to optimize its efficiency.
Detailed Diameter Reference Guide Available Here
Diameter Selection Guide (FOR WYS-20 and WYS-22 SERIES)
9,000 BTU Models (except for 22 SEER 115V) |
1/4"-3/8" |
12,000-18,000 BTU Models (as well as 9k 22 SEER 115V) |
1/4"-1/2" |
24,000 BTU and Above Models |
3/8"-5/8" |
Diameter Selection Guide (FOR DIAMANTE/WYT-19 SERIES)
9,000 BTU - 18,000 BTU |
1/4"-3/8" |
24,000 BTU |
1/4"-1/2" |
36,000 BTU |
1/4"-5/8" |
Diameter Selection Guide (FOR DIAMANTE ULTRA/WYT-22 SERIES)
9,000 BTU - 12,000 BTU |
1/4"-3/8" |
18,000 BTU |
1/4"-1/2" |
24,000 BTU |
1/4"-5/8" |
Diameter Selection Guide (FOR HYPERFORMANCE WYF-25 SERIES)
9,000 BTU - 12,000 BTU |
1/4"-3/8" |
18,000 BTU |
1/4"-1/2" |
24,000 BTU |
3/8"-5/8" |
Wrench/Tool Sizes Needed
The corresponding Wrench/Tool sizes needed to turn the flare nuts of the line-sets are as follows:
Line Diameter
|
Wrench Size
|
1/4"
|
5/8"
|
3/8"
|
13/16"
|
1/2"
|
15/16"
|
5/8"
|
1-1/16"
|
3/4"
|
1-5/16"
|
Pioneer’s copper tubing kits include:
- Copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wires between indoor and outdoor units (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2" wide, 50' length)
Feature Set of Copper Piping Kit Lineset for Mini Split Installation:
- Highest Quality Full Copper Piping Kit Set.
- Compliance with ASTM-B280 Standard (USA-Canada).
- Dehydrated Soft Drawn Copper Tubes.
- Three Layer Water Proof P.E. Insulation.
- Brass Flare Nuts, on ready-formed flare ends.
- Matching Length 16 Gauge 4 Lead Signal Cable set.
- Plastic dust caps, to keep clean during installation.
- Wall Sleeve/Liner with Cap.
- Wall Filler Putty.
- Non Adhesive Wrapping