Olimpia Splendid Sitali CX 180
![](https://cdn.shopify.com/s/files/1/0771/7932/2665/files/2_bd6b13a2-57d6-46d2-a093-f4086f749bbd.jpg?v=1724647967)
SITALI CX 180
Double flow centralised HRV
The VMC ducted Sitali CX 180 dual-flow unit with heat recovery can be installed horizontally (ceiling or counter-ceiling), has a maximum air flow rate of 177 m3/h, and is available in two versions, with or without a multifunction control panel. Thanks to the built-in physical bypass, the Sitali CX 180 unit is ideal for "free cooling"operation during the summer season.
INTEGRATED PHYSICAL BYPASS
Ideal for “free cooling” operation during the summer
HORIZONTAL INSTALLATION
Ideal for installation the ceiling or false ceilings, in a
horizontal position.
MANUAL OR AUTOMATIC CONTROLS
Sitali COAX 180 features a multi-function control
panel with LCD display (see image on the side).
Sitali COVID 180 does not have controls and must be
combined with an S-type control (simplified, one of
codes B1061, B1062, B1063).
FEATURES
• External frame made of pre-coated RAL 9010 galvanized steel.
• Internal structure made of expanded polypropylene to reduce thermal bridges,
noise emission and to ensure maximum seal.
• Energy-efficient external rotor EC motors. Featuring thermal protection and
mounted on ball bearings for long service life.
• Ultra-quiet and high-performance, balanced centrifugal fan with backwardcurved blades coupled directly and dynamically balanced to the motor.
• Cross-flow, counterflow heat exchanger with high efficiency.
• Simplified electrical connection: the unit is supplied pre-wired.
• ISO Coarse 60% (G4) filters easily removable from the outside: no need to
remove the access panel to perform maintenance operations. ISO ePM1 60%
filter (F7) on request.
• Automatic frost protection preventing ice formation on the inlet side of the
heat exchanger.
• Double condensation drain that can be used based on climatic requirements
OPERATION
Version with CX0A 180 automatic control
• 3-speed setting and selection.
• Boost function.
• Holiday and Night Mode function.
• Weekly programming.
• By-pass control
• Air flow balancing.
• Filter maintenance and fault indicator.
• Hour count indicator
• Settings savings and uploading.
• Connection to remote room sensors (humidity, CO2, etc.)
• ModBus interface.
• Connection to electric heating element before and after the ventilation unit.
• Connection to water heating coil
Version with COVID 180 manual control
• Three-speed operation with simplified external S-type control, which also
allows manual activation of the bypass.
![](https://cdn.shopify.com/s/files/1/0771/7932/2665/files/1_c02945d7-e21a-49d9-abe2-57e6d8fa8293.jpg?v=1724647968)