Olimpia Splendid Bi2 Wall
![](https://cdn.shopify.com/s/files/1/0771/7932/2665/files/12_3a5aa466-6bae-4191-baa1-42bb50750830.jpg?v=1724542419)
Bi2 WALL
Slim high-wall terminal units
With a sound power level among the lowest in its category, Bi2 Wall slim is the high-wall fan coil unit designed to achieve one of the highest power-to-volume ratios on the market. Its extreme compactness (940x303x226mm) allows easy above-door installation in most situations, and its features make it the perfect terminal for new buildings with limited space and in the most complex renovations with high performance requirements (up to 3.90 kW in cooling).
COMPACT DESIGN
Specifically designed to minimise volume and
expand the possibilities for over-door installation.
With equal power, it is among the most compact on
the market.
FAMILY FEELING
Similar design as the Bi2 Air terminal to allow
aesthetically coordinated installations in the same
environment.
MULTISET CONTROL
Integrated electronics allows touch operation,
remote control and home automation connection.
FEATURES
• Heats, cools, dehumidifies and filters.
• DC brushless motor
• Total flat aesthetics.
• Range composed of 3 power models.
• Terminal unit supplied with 2 or 3-way valve integrated with 4-wire electrothermal actuator.
• Single-piece body for working comfortably.
• Steel air delivery flap, motorised.
• Extractable filters located on the air intake.
• Remote control supplied (only for TR control).
• Optional condensation drain pump.
• Available in the colours: White RAL 9003
INTEGRATED CONTROLS AS STANDARD
TR (Touch Remote) CONTROL:
includes on-board touch control and remote control (supplied).
Additionally, through a combination of keys, it is possible to obtain
remote* control with a B0736 wall remote control or a home automation
control (SiOS Control by Olimpia Splendid or MyHome by Bticino), via the
Modbus RS485 serial protocol (ASCII or RTU). In addition, a correction of
the room temperature read can be added via the user interface.
AR (Analogic Remote) CONTROL:
Allows remote control by interfacing with wall controls or home
automation control systems via 0-10V analogue input or contacts (for fan
coil radiators, use the contact mode). It has a 230Vac output for control of
a solenoid valve and a water probe inlet with the function of a minimum
probe (for both modes of remote control). AR models on request.
![](https://cdn.shopify.com/s/files/1/0771/7932/2665/files/11_bad5a6bd-1cb3-4a0d-a248-fa401e761f72.jpg?v=1724542419)