SPEND $2000 OR MORE AND GET A FREE HANDGUN SAFE! + 15% OFF ACCESSORIES
Spend $2000 or more and get a free handgun safe!
Call Button
Speak With Expert
800-984-5719
Skip to content

Mesa Safe Keypad Replacement: A Step-by-Step Guide

Mesa Safe is a well-known brand that provides high-quality safes to protect your valuables. However, over time, the keypad lock on your Mesa Safe may become damaged or stop working altogether. This can be a frustrating experience, especially if you have important documents or valuable items stored inside the safe.

Fortunately, replacing the keypad lock on your Mesa Safe is a fairly straightforward process. There are a variety of replacement options available, including digital electronic lock kits and swing bolt locks. Mesa Safe's technical support team can help you determine which replacement lock will work best for your specific safe model. With the right replacement lock, you can restore the security of your Mesa Safe and have peace of mind knowing your valuables are protected.

Understanding Mesa Safe Keypad

Mesa Safe is a trusted brand that offers a variety of safes for different security needs. Their safes come with electronic locks that use a keypad to enter a code and open the safe. Understanding how the keypad works is essential to ensure the safe is secure and easy to use.

Mesa Safe Keypad Features

Mesa Safe keypads are designed to be user-friendly and durable. They feature backlit buttons that make it easy to enter the code even in low light conditions. The buttons are also wear-resistant, ensuring that they will last a long time even with frequent use.

The keypad also has an override key that can be used to open the safe in case the code is forgotten or the battery dies. Mesa Safe provides detailed instructions on how to use the override key in case of an emergency.

Mesa Safe Keypad Programming

Programming the Mesa Safe keypad is straightforward and can be done in a few simple steps. The first step is to locate the red button on the inside hinge side edge of the door. Pressing this button will activate the keypad and allow you to enter the code.

To program a new code, enter the current code followed by the "*" key. The keypad will beep twice, indicating that it is ready to receive the new code. Enter the new code and press the "#" key to confirm it. The keypad will beep twice again, indicating that the new code has been programmed successfully.

Mesa Safe Keypad Troubleshooting

If the Mesa Safe keypad is not working correctly, there are a few troubleshooting steps that can be taken. The first step is to check the battery and replace it if necessary. Mesa Safe recommends using a 9-volt premier alkaline battery and replacing it annually.

If the keypad is still not working correctly, it may be necessary to reset the code. Mesa Safe provides detailed instructions on how to reset the code in their FAQ section.

Conclusion

Understanding the Mesa Safe keypad is essential to ensure the safe is secure and easy to use. Mesa Safe keypads are designed to be user-friendly and durable, with features like backlit buttons and an override key. Programming the keypad is straightforward, and troubleshooting steps are provided if necessary.

Types of Mesa Safe Keypads

Mesa Safe is a well-known brand in the safe industry, and they offer a variety of keypad options for their safes. When it comes to replacing a Mesa Safe keypad, it's important to know which type of keypad you have. Here are the three main types of Mesa Safe keypads:

MSL-5 Keypad

The MSL-5 keypad is a simple, easy-to-use keypad that is used on some of Mesa Safe's smaller safes. It features a four-digit combination code and a "lock" button to secure the safe. The MSL-5 keypad is not backlit, so it can be difficult to see in low-light situations.

MSL-50 Keypad

The MSL-50 keypad is a step up from the MSL-5 and is used on some of Mesa Safe's larger safes. It features a six-digit combination code and a backlit keypad for easy use in low-light situations. The MSL-50 keypad also has a lock-out penalty feature that will lock the keypad for a set amount of time if too many incorrect codes are entered.

MSL-500 Keypad

The MSL-500 keypad is the most advanced keypad option offered by Mesa Safe. It features a six-digit combination code and a backlit keypad for easy use in low-light situations. The MSL-500 keypad also has a lock-out penalty feature and can store up to six different user codes. It is commonly used on Mesa Safe's depository safes.

When replacing a Mesa Safe keypad, it's important to make sure you are getting the correct keypad for your safe. Mesa Safe offers replacement keypads for all of their safes, and you can contact their technical support team for assistance in finding the right keypad for your safe.

Technical Aspects of Mesa Safe Keypad

Mesa Safe is a trusted brand in the security industry. Their safes are designed to protect your valuables from theft, fire, and other hazards. One of the essential components of a Mesa Safe is the keypad. In this section, we will discuss the technical aspects of the Mesa Safe keypad.

Keypad Design

The Mesa Safe keypad is designed for easy use and maximum security. The keypad features a simple design with large buttons that are easy to read. The buttons are backlit, making it easy to use the keypad in low-light conditions. The keypad is also designed to be durable and long-lasting, ensuring that it will stand up to frequent use.

Keypad Functions

The Mesa Safe keypad has several functions that make it easy to use and secure. The keypad is designed to be user-friendly, with simple instructions that allow you to set your own codes and change them as needed. The keypad also has a lock-out penalty feature that prevents unauthorized access to your safe. If you enter the wrong code several times, the keypad will emit a series of beeps and lock you out for a set period.

Keypad Indicators

The Mesa Safe keypad has several indicators that provide information about the status of the safe. The keypad features a green light that indicates that the safe is unlocked and ready to use. The green light will turn off after a set period to conserve battery life. The keypad also has a red light that indicates that the safe is locked. If the battery is low, the keypad will emit a series of beeps to alert you that it needs to be replaced.

Keypad IP Rating

The Mesa Safe keypad is designed to be weather-resistant and durable. The keypad has an IP rating of 54, which means that it is protected from dust and water splashes. This rating ensures that the keypad will continue to function even in harsh environments.

In summary, the Mesa Safe keypad is designed to be user-friendly, secure, and durable. The keypad features large buttons, backlit keys, and several indicators that provide information about the status of the safe. The keypad is also weather-resistant and has an IP rating of 54, ensuring that it will continue to function even in harsh environments.

Replacing Your Mesa Safe Keypad

If you need to replace your Mesa Safe keypad, there are a few steps you can follow to ensure a smooth installation process.

First, you will need to obtain a replacement keypad. Mesa Safe offers a variety of replacement keypads, so make sure to choose the one that matches your safe's model and lock type. You can purchase a replacement keypad directly from Mesa Safe or from an authorized dealer.

Once you have your replacement keypad, you can begin the installation process. Mesa Safe provides detailed instructions for replacing your keypad in the owner's manual for your safe. If you don't have a copy of the owner's manual, you can download one from the Mesa Safe website.

Before you begin the installation process, make sure to gather all the necessary tools and equipment. You may need a screwdriver, pliers, and other tools depending on your safe model and lock type.

If you encounter any issues during the installation process, don't hesitate to contact Mesa Safe's technical support team. They can provide guidance and troubleshooting tips to help you complete the installation successfully.

In some cases, you may need to replace the entire lock kit instead of just the keypad. Mesa Safe offers replacement lock kits for a variety of safe models and lock types. If you're unsure whether you need to replace the entire lock kit, contact Mesa Safe's technical support team for guidance.

Overall, replacing your Mesa Safe keypad can be a straightforward process if you follow the manufacturer's instructions and take the necessary precautions. If you have any questions or concerns, don't hesitate to reach out to Mesa Safe's technical support team for assistance.

Resetting and Operating Mesa Safe Keypad

If you have forgotten the user code for your Mesa Safe keypad, you can reset it by following the instructions provided in the user manual. The manual will also provide you with the operating instructions for the keypad.

To reset the user code, you will need to press the reset button on the keypad. This will erase the current user code and allow you to set a new one. Once you have reset the user code, you will need to follow the operating instructions to program the new code.

It is important to note that if you enter the wrong code multiple times, the keypad will activate a wrong code penalty. This penalty will lock the keypad for a certain amount of time, typically five minutes, to prevent unauthorized access.

Mesa Safe keypads can be set up in single or dual user mode. In single user mode, only one user can access the safe at a time. In dual user mode, two users are required to access the safe. This provides an added layer of security.

Some Mesa Safe keypads also have a time delay feature. This feature will activate a delay between the time the code is entered and when the safe can be opened. This can be useful in situations where you need to delay access to the safe, such as during a robbery or break-in.

In conclusion, resetting and operating a Mesa Safe keypad is a straightforward process. By following the instructions provided in the user manual, you can reset the user code and program a new one. It is important to follow the operating instructions carefully and to be aware of the wrong code penalty, single and dual user mode, and time delay features.

Dealing with Mesa Safe Keypad Issues

If you are experiencing issues with your Mesa Safe keypad, there are a few things you can try to resolve the problem. Here are some common issues and their solutions:

Low Battery Alert

If your Mesa Safe keypad is beeping and displaying a low battery alert, it's time to replace the battery. Mesa Safe recommends using a Duracell 9V battery for best performance. To replace the battery, follow these steps:

  1. Open the battery compartment on the back of the keypad.
  2. Remove the old battery and dispose of it properly.
  3. Insert the new battery, making sure the positive and negative terminals are aligned correctly.
  4. Close the battery compartment.

Wrong Code Penalty

If you enter the wrong code multiple times in a row, the Mesa Safe keypad will go into lockout mode for a set period of time. This is a security feature designed to prevent unauthorized access to the safe. If you are in lockout mode, wait the designated time before attempting to enter your code again.

Battery Replacement

If your Mesa Safe keypad is not functioning properly, it may be time to replace the battery. Follow the instructions above to replace the battery with a fresh Duracell 9V battery.

Other Issues

If you are still experiencing issues with your Mesa Safe keypad, try the following troubleshooting steps:

  • Check that the keypad is securely connected to the safe.
  • Make sure you are entering the correct code.
  • Clean the keypad with a soft, dry cloth.
  • Contact Mesa Safe technical support for further assistance.

Remember to always handle your safe and its components with care to avoid damage or injury. With proper maintenance and care, your Mesa Safe keypad should provide years of reliable service.

Emergency Procedures for Mesa Safe Keypad

If you forget your safe's combination or if the keypad malfunctions, there are a few emergency procedures you can follow to open your safe. These procedures are designed to help you gain access to your safe quickly and safely.

Emergency Code

MESA Safe provides an emergency code that can be used to open your safe if you forget your combination. The emergency code is a pre-set code that is programmed into the safe's electronic lock. You can find the emergency code in your safe's user manual or on the MESA Safe website.

To use the emergency code, enter the code on the keypad and turn the handle. The safe should open. Once you have accessed your safe, it is recommended that you change the combination to a new code that only you know.

Notarized Document

If you have lost your combination and do not have access to the emergency code, you can request a notarized document from MESA Safe that will allow you to open your safe. To obtain a notarized document, you will need to provide proof of ownership and identification.

The notarized document will contain a new combination that you can use to open your safe. It is important to keep the notarized document in a safe place, as it contains sensitive information that could be used to access your safe.

Notary Form

If you have lost your combination and do not have access to the emergency code or a notarized document, you can request a notary form from MESA Safe. The notary form will allow you to prove ownership of your safe and request a new combination.

To obtain a notary form, you will need to provide proof of ownership and identification. Once you have the notary form, you will need to take it to a notary public and have it notarized. Once the form is notarized, you can send it to MESA Safe and they will provide you with a new combination.

Remember, opening your safe using emergency procedures should only be done in case of an emergency. It is important to keep your combination and emergency code in a safe place where only you can access it.

Warranty and Customer Support

When it comes to replacing the keypad on your Mesa Safe, it's important to understand the warranty and customer support options available to you. Mesa Safe Company offers a one-year warranty from the original purchase date on manufacturing defects only, as stated on their Technical Support page. This means that if you experience any issues with your keypad due to a manufacturing defect, Mesa Safe Company will replace it free of charge within one year of your purchase date.

To utilize your warranty, you will need to provide proof of purchase. If you have lost your proof of purchase, Mesa Safe Company may still be able to help you. Their Customer Care team is available Monday through Friday from 8:00am to 4:30pm Pacific Standard Time to assist you with any questions or concerns you may have.

If you need to order a replacement keypad, you can do so by contacting Mesa Safe Company's customer service team. They will be able to assist you in ordering the correct replacement keypad for your safe. If you have any questions or concerns about your replacement keypad, you can contact customer service for assistance.

If you have a Mesa Gun Safe, it is important to note that they have a separate warranty from the standard Mesa Safe warranty. The Mesa Gun Safe Warranty covers defects in materials and workmanship for the lifetime of the original owner. Any services provided by Mesa Safe Company will not be covered under the warranty.

To help better serve you in the future with ordering keys, lost combinations, warranty information, and special deals, Mesa Safe Company recommends registering your safe. You can register your safe on their Technical Support page.

Please note that Mesa Safe Company operates on business days only. If you need assistance outside of business hours, you can leave a message with their customer service team and they will get back to you as soon as possible.

Where to Buy Mesa Safe Keypad Replacement

If you need to replace the keypad on your Mesa Safe, you may be wondering where to buy one. Fortunately, there are several options available to you. Here are some places you can look for Mesa Safe keypad replacements:

Mesa Safe Website

The Mesa Safe website offers a variety of replacement parts for their safes, including keypads. You can browse their selection and order directly from their website. They offer a wide range of replacement parts, and you can be confident that you are getting a genuine Mesa Safe product.

Amazon

Another option for purchasing a Mesa Safe keypad replacement is Amazon. They offer a variety of replacement keypads from different sellers, so be sure to check the reviews before making a purchase. You may also want to verify that the keypad is compatible with your specific Mesa Safe model.

Local Locksmiths

If you prefer to shop locally, you can try contacting a locksmith in your area. Many locksmiths carry replacement parts for safes, including Mesa Safe keypads. They may also be able to install the replacement keypad for you.

Hardware Stores

Some hardware stores may carry replacement keypads for safes. However, it may be more difficult to find a Mesa Safe replacement keypad specifically. You may need to call ahead or visit several stores to find what you are looking for.

In conclusion, there are several options available to you when it comes to purchasing a Mesa Safe keypad replacement. Whether you choose to order from the Mesa Safe website, Amazon, a local locksmith, or a hardware store, be sure to verify that the replacement keypad is compatible with your specific Mesa Safe model.

Frequently Asked Questions

How do I replace the keypad on my Mesa safe?

If you need to replace the keypad on your Mesa safe, you can follow these steps:

  1. Remove the old keypad by unscrewing it from the safe door.
  2. Disconnect the wires from the old keypad.
  3. Connect the wires to the new keypad.
  4. Screw the new keypad onto the safe door.

Where can I find Mesa safe replacement parts?

You can find Mesa safe replacement parts on the Mesa Safe website or through an authorized dealer. It is important to only use genuine Mesa safe replacement parts to ensure the safe's security is not compromised.

How do I get a replacement key for my Mesa safe?

To get a replacement key for your Mesa safe, you will need to contact Mesa Safe technical support. They will ask for your safe's serial number and other identifying information to ensure the key is being sent to the rightful owner.

What is the process for contacting Mesa safe technical support?

To contact Mesa Safe technical support, you can call their toll-free number or fill out a contact form on their website. Be sure to have your safe's serial number and other identifying information ready to provide to the support representative.

How do I find the serial number on my Mesa safe?

The serial number on a Mesa safe can typically be found on the back of the safe or on the safe door. It may also be located on the owner's manual or on the original purchase receipt.

What is the default factory code for Mesa safes?

The default factory code for Mesa safes is typically 1-2-3-4-5-6-7-8-9#. However, it is recommended to change the code to a unique combination to ensure maximum security. Instructions on how to change the code can be found in the owner's manual or on the Mesa Safe website.

Previous article Liberty Safes Website: The Ultimate Solution for Your Valuables Security